Pourable Anchoring Resin
Chemical Anchors and Pouring Mortar
Product Information
Metolux Metoset Pourable Styrene Free is a two-part, free-mix, rapid-curing concrete repair resin and anchoring system. Specially formulated for extreme high strength in both compression and tension, it is ideal for anchoring large bolts, starter bars, and machinery installations.
The product features a unique packaging system that houses the pre-mixed aggregate and resin, enabling fast, clean, and easy mixing.
Metoset Pourable SF
Two-Part Styrene-Free Multi-Purpose Pourable Resin
Advantages:
Styrene-free resin system
Made from 58% recycled material
Fast and easy repairs for dangerous cracked concrete
Ideal for anchoring posts, large bolts, pillars, and more
Typical Uses
Repairing large cracks in concrete surfaces requiring self-leveling properties or access to difficult areas
Bedding coping stones, concrete units, steel, concrete, or wooden posts
Anchoring threaded steel bolts into solid, cementitious surfaces
Application
Mixing Instructions
Stir the contents of the resin tin thoroughly before use.
Remove the cardboard dividing card from the container.
Add all resin contents to the aggregate and mix until the resin is fully incorporated, achieving an even consistency.
Application
Concrete Repair:
Remove all debris and dust from the repair area.
Ensure the surface is clean, dry, and sound prior to application.
Anchoring:
Drill holes to the correct diameter and depth.
Remove debris from the hole using a steel brush and compressed air or a push pump.
Ensure anchoring bars are free from oil, grease, and flaking rust.
The product can be poured directly into the prepared area. Do not apply below -5°C.
Coverage Calculation
To calculate how many litres of product you need:
(length (cm) × width (cm) × depth (cm)) ÷ 1000 = Required litres of product
Storage & Shelf Life
Store between +5°C and +25°C
Shelf life: Minimum 12 months in original, unopened packaging
Pack Sizes
| Pack Size | Pallet |
|---|---|
| 5kg | 80 |
| 3.1 litres | |